Login Exploit

[Kyle]

** This exploit doesn't work anymore

The new method which isn't that much different can be found here:
http://forum.rev6.com//Silkroad-Expl...post47266.html
Just an ip and dns change, now the real question is are gold bot using the dns or the raw ip?


** This exploit doesn't work anymore


http://www.rev6.com/loginTutorial.txt

You can do this legitly, no need to cheat.
This is for legit player to login faster.
It is based on multiple test compiled in the last 24 hours.

This entire tutorial might not be working,
it is for you to decide if it work or not.

There is 4 login server
121.128.133.26:15779
121.128.133.27:15779
121.128.133.28:15779
121.128.133.29:15779

** This exploit doesn't work anymore

Reason behind why this method work:
When you are on Silkroad online and you type your account name and password, sro_client.exe connect to 1 of those 4 servers randomely.

The server .26 and .27 are the oldest login server.
The server .28 and .29 are the newer login server added recently.

The new login system is in fact a QUEUE LIST SYSTEM!
You will claim it is not, I am not here to argue, both rev6 and other programmer has confirmed that even though it send a connect to server packet each 20 seconds, it is still a queue list system.

The issue is that all the gold bot and clientless bot only use the server .26 and .27 and haven't been updated to use the newer server .28 and .29
In fact most of the clientless only connect to the server .26

Each server has their own queue list system:
.26 --> queue list 1 (extremely long) [gold bot clientless]
.27 --> queue list 2 (really long) [some clientless and old bot]
.28 --> queue list 3 (really short) [legit user + few bot]
.29 --> queue list 4 (really short) [legit user + few bot]

Now test it for yourself, when you connect to silkroad, you can follow the tutorial and figure out on which of the 4 login server you are connected to.

If you are connected to the server .26 it will take up sometime even more than 12 hours to connect. The server .27 is the same but a bit least depending on which server it is.
Which is why you never want to be in a queue list with gold bot or to be more precise .26 and .27

This should work for a while, no idea if gold bot will update their client and make the login awfull on each server.

If you are connected to the server .28 or .29, you will in general login within 30 minutes. In other word, when you open silkroad and before you type your password do the following:

Step 1
click on Start / Program / Accessories / Command prompt
OR
Click on start / run / Type cmd

Step 2 You have a Black command prompt open [opened from Step #1]
Step 3 Silkroad is open at the login server

Type in the black console: netstat -n
Type enter after and some big listing will appear of all your connection

Search for either of those server in the 3rd column [Foreign Address]
121.128.133.26:15779
121.128.133.27:15779
121.128.133.28:15779
121.128.133.29:15779

If you are on the server 26 or 27, close silkroad and reopen to the login server.
If you are on the server 28 or 29, type in your account name and password.
Click connect and wait.

** This exploit doesn't work anymore

There is also other way like modifying your hosts files to only connect to the server .29

By adding those line:
121.128.133.29 gwgt1.joymax.com
121.128.133.29 gwgt2.joymax.com
121.128.133.29 gwgt3.joymax.com
To the file 'C:\Windows\System32\drivers\etc\hosts'
Which isn't recommanded if you do not know what your doing.
Please note if you can't save the file, it because hosts is in read only mode, find the file, go in properties and remove the read only checkmark
Please note if the login server .29 crash, your silkroad will never try to connect to any of the other 3 login server, so if that happen, you need to erase those 3 line to open silkroad and be able to login to a server other than the server .29 (the server .28 crashed a few times this week)

** This exploit doesn't work anymore

[IthSao]

what if we are on vista

[Kyle]

what if we are on vista

I am on vista 64 bit and those tutorial work.
Though it not confirmed that people connect faster on the server 28-29
It is just a rumor at this point, we need people to open 2 silkroad on 2 different login server and connect to the same server with 2 differents account

To then be able to figure out if it true that it using a queue system to begin with that that you login faster if your login server has a smaller queue list.

[Kyle]

There 2-3 peoples who confirmed login in within 30 min on those login server, if you login in least than 30 min, it mean it most likely work, if you do not login within 30 min, it mean that either your really unlucky or maybe this method doesn't work at all.

Though up to now it seem to give good result.

[Canabyss]

Testing it right now =)

[Kyle]

Testing it right now =)

Let me know, until now there has been more good result than bad result mainly on the server 29

[Synx]

I will test this tomorrow, when my chars get DC XD
Thanks for sharing

[refo]

wow its amazing 5min and log in thanks for the tip ^^

[Amrmafia]

lets try this xD

[Ossie7]

Thanks for life kyle!

I'm testing now, hope it works within 30 minutes.

[Cryolite]

when everyone learns this, everyone will try to connect 28 and 29 , making them crowded like 25 and 26,

am i rite? xD

edit : fixed my spelling lol

[xxaLer]

Whenever I try to save the file, it won't let me. What program should I open it with?

[Kyle]

when everyone learns this, everyone will try to connect 28 and 29 servers, making them crowded like 26 and 26,

am i rite? xD

Most likely gold bot will never change their application {keep your finger crossed}

If such a thing happen, then it a fight to figure out which of the 4 server has the smallest queue list >.>

Though I believe even if this is out, there still a lot of people who do not speak english that play the game or plenty of other kind of people who use old bot version will still connect to .26 for quite a while.
In other word, I would consider banning the server 26 entirely and 27 too
If we can't connect to the server 28 and 29 in least than 1 hour, then we might consider retrying the older ip.

[Kyle]

Whenever I try to save the file, it won't let me. What program should I open it with?

Your host file is readonly

Open My computer // drive C // windows // system32 // drivers // etc
In that folder go on properties of the file called Hosts
You will see a read-only checkmark

Remove it and after that you will be able to save the modification.

[Ossie7]

Sorry kyle, didn't make it within 30 minutes @ .29, maybe .28 but for now I will see how long it will take for 28 to log me in

[spidythehero]

WoooW thx very much ^^

Peace!!!

[divination]

does it work with auto login?

[Kyle]

does it work with auto login?

With the silkroad auto-login yes.
I said 30 min, but that average time it take.
I basically login in least than 30 each time on my game server, though we are most likely not on the same game server.

If you can't connect in 30 min, just say what your server ex: Xian
So that we can figure out if it just 1 server that has a really long queue list or not.

I guess we need to make some stats, how long does it take to login on each queue list of each server.

We will look into it to add it to rev6 stats.

So the stats will tell you each each server Xian to apollo for the 4 server 26 tp 29, how much time it take to connect to the game server without a premium. This way we can estimate the queue list everywhere. That is if it really is a queue list.

[HaxUnLimited]

Hi!
Sorry but i need 1hour and 30min to log in....alot of ppl are already using this way to log in^^.
We gotta find a new one. If Rev6 Team needs me i will be there...

[voxado]

Is it me, or does recyfer's ****** - ************ alwais connect to 27 ?...
i tried like 10 times and alwais got on server 27...

Withouth the ****** i'm connecting to server 29 right now
So lets hope i connect ^^

greetz